Product

lokasi saat ini:

Acrylic polyurethane topcoat

Features

The product prepared by reaction kettle using triple modified acrylic resin and polyurethane resin not only has the characteristics of fast drying of acrylic acid, good color retention, and outdoor weather resistance, but also has the characteristics of full polyurethane paint film and strong adhesion.
Contact Us
-+
ADD to Quote

Product Details

[产品介绍]

[Product Introduction]

采用三重改性丙烯酸树脂、聚氨酯树脂经反应釜制备的既有丙烯酸快干、保色性好、户外耐候的特点又有聚 氨酯漆膜丰满、附着力强的特点。

The product prepared by reaction kettle using triple modified acrylic resin and polyurethane resin not only has the characteristics of fast drying of acrylic acid, good color retention, and outdoor weather resistance, but also has the characteristics of full polyurethane paint film and strong adhesion.


[案例]

case

中 交 集 团 第 二 工 程 - 榆 佳 高 速 / 中 铁 大 桥 局 小 浪 底 项 目

CCCC Second Project - Yujia Expressway/China Railway Major Bridge Bureau Xiaolangdi Project


[主要组成]

[Main components]

该产品是由聚氨酯树脂、颜料、填料、助剂、无铅溶剂组    成的漆料为甲组份组份,以异氰酸酯乙组份组成的双组份    自干涂料。

This product is a two-component self drying coating composed of polyurethane resin, pigments, fillers, additives, and lead-free solvents as component A, and isocyanate component B.


[主要特性]

[Main Characteristics]

保护性能优异;干燥快;附着力强,耐水性良,机械性能   良;耐化学品性能良。

Excellent protection performance; Dry quickly; Strong adhesion, good water resistance, and excellent mechanical properties; Good chemical resistance.


[主要用途]

[Main purpose]

用于各种交通车辆、工程机械、高级仪器设备及其他表面    要求高档装饰的物件,特别适合于户外使用。

Used for various transportation vehicles, engineering machinery, advanced instruments and equipment, and other objects with high-end surface decoration requirements, especially suitable for outdoor use.


[执行标准]

[Execution Standards]

HG/T       2454-2014

[技术指标]

[Technical indicators]

细度≤40μm

Fineness ≤ 40 μ m


干燥时间:表干时间≤0.5-1h、 实干时间≤18-22h

Drying time: surface drying time ≤ 0.5-1h, actual drying time ≤ 18-22h


耐冲击性:50cm   铅笔硬度:≥F

Impact resistance: 50cm Pencil hardness: ≥ F


断裂伸展率/%:50

Fracture elongation rate/%: 50


附着力(拉开法)/Mpa:≥4

Adhesion (pull-out method)/Mpa: ≥ 4


耐酸性(50g/LH₂SO4)):168h    无异常

Acid resistance (50g/L H ₂ SO4): No abnormalities after 168 hours


耐碱性[饱和 Ca(OH)2]:168h      无异常

Alkali resistance [saturated Ca (OH) 2]: No abnormalities after 168 hours


耐盐雾性:1000h不起泡,不生锈,不开裂

Salt spray resistance: no foaming, rusting, or cracking after 1000 hours


耐人工气候老化性:1000h不起泡,不生锈,不开裂

Resistant to artificial weather aging: no foaming, rusting, or cracking after 1000 hours


[包装规格] 24 kg/组(漆:固化剂=20:4)

[Packaging Specification] 24 kg/set (Paint: Curing Agent=20:4)


[配套用漆][Supporting paint]

环氧富锌底漆、环氧封闭底漆、环氧云铁中间 漆、各色聚氨酯中漆。

[Supporting paint] Epoxy zinc rich primer, epoxy sealing primer, epoxy mica iron intermediate paint, various colors of polyurethane intermediate paint.

微信截图_20250514160429.png

halaman sebelumnya:Acrylic Enamel/Topcoat
halaman berikutnya:The last product

Related Suggestion

Online Consultation

Kirim